This unit is designed to stand in front of any opening, covering both the opening and any adjacent trim. The unit will attach to the wall via a valance mounted above the opening. The panel pivots on a base attached to the floor, out and away from the wall.
In the closed position, the back of the bookcase will sit 2” out from the wall. This gives the unit room to maneuver and clear trim or moulding up to ¾” thick. If necessary, this gap can be covered on one or both sides by attaching a piece of trim directly to the wall after the unit has been installed.

Total width: 18-32”

This unit is designed to stand in front of any opening, covering both the opening and any adjacent trim. The unit will attach to the wall via a valance mounted above the opening. The unit pivots and rolls on a base attached to the floor. The two panels are attached in the center with a piano hinge. The door opens out and to the side like a bi-fold door. The unit can be set up to open either toward the left or the right.
In the closed position, the back of the bookcase will sit 2” out from the wall. This gives the unit room to maneuver and clear trim or moulding up to ¾” thick. If necessary, this gap can be covered by attaching a piece of trim directly to the wall after the unit has been installed.

Total width: 31-60”

This unit is designed to stand in front of any opening, covering both the opening and any adjacent trim. The unit will attach to the wall via a valance mounted above the opening. The panels pivot on bases attached to the floor. The two panels pivot away from the wall and away from each other from the center.
In the closed position, the back of the bookcase will sit 2” out from the wall. This gives the unit room to maneuver and clear trim or moulding up to ¾” thick. If necessary, this gap can be covered by attaching a piece of trim directly to the wall after the unit has been installed.

Total width: 31-60”

This unit is designed to stand in front of any opening, covering both the opening and any adjacent trim. The unit will attach to the wall via a valance mounted above the opening. The unit pivots and rolls on a base attached to the floor. Two panels are attached in the center with a piano hinge and open out and to the side like a bi-fold door. The third panel simply pivots in the opposite direction. This panel can be on either side of the bi-fold panels.
In the closed position, the back of the bookcase will sit 2” out from the wall. This gives the unit room to maneuver and clear trim or moulding up to ¾” thick. If necessary, this gap can be covered by attaching a piece of trim directly to the wall after the unit has been installed.

Total width: 61-90”

This unit is designed to stand in front of any opening, covering both the opening and any adjacent trim. The unit will attach to the wall via a valance mounted above the opening. The unit pivots and rolls on a base attached to the floor. The door consists of four panels, two sets of two panels on each side that are hinged in the center with a piano hinge. Each set will open out and to the side like a bi-fold door.
In the closed position, the back of the bookcase will sit 2” out from the wall. This gives the unit room to maneuver and clear trim or moulding up to ¾” thick. If necessary, this gap can be covered by attaching a piece of trim directly to the wall after the unit has been installed.

Total width: 91-120”